| List of Conceptronic C54APT Access Point CLI commands: |
| config wlan | config wlanX |
| connect bss | connect to bssX |
| find bss | Find BSS |
| find channel | Find Available Channel |
| find all | Find All BSS |
| superftp | Software update via FTP |
| had | Software update HAD file via FTP |
| ftp | Software update TFP file via FTP |
| help | Display CLI Command List |
| ping | Ping |
| reboot | Reboot Access Point |
| quit | Logoff |
| timeofday | Display Current Time of Day |
| version | Software version |
| tftp get | Get a file from TFTP Server. |
| tftp uploadtxt | Upload the configuration of the device to TFTP Server. |
| tftp srvip | Setup the TFTP Server IP address. |
| tftp update | Update the file to the device. |
| tftp info | Information about the TFTPC setting. |
| del/get/set acl | Access Control List |
| del/get/set wdsacl | WDS Access Control List |
| del/get/set key | Encryption key |
| get apmodenext | AP Mode after reboot |
| get association | Association Table |
| get config | Current AP Configuration |
| get countrycode | Country Code |
| get hardware | Hardware Revisions |
| get rootapinfo | Root AP Information |
| get station | Station Status |
| get uptime | UpTime |
| get wdsap | WDS Access Point |
| get/set aging | Aging Interval |
| get/set antenna | Antenna Diversity |
| get/set authentication | Authentication Type |
| get/set autochannelselect | Auto Channel Select |
| get/set apmode | AP Mode(runtime) |
| get/set basic11b | Basic 11b Rates |
| get/set beaconinterval | Beacon Interval |
| get/set burstSeqThreshold | Max Number of frames in a Burst |
| get/set burstTime | Burst Time |
| get/set channel | Radio Channel |
| get/set cipher | Encryption cipher |
| get/set domainsuffix | Domain Name Server suffix |
| get/set dtim | Data Beacon Rate (DTIM) |
| get/set encryption | Encryption Mode |
| get/set extendedchanmode | Extended Channel Mode |
| get/set eth2wlan | Eth2Wlan Broadcast packet filter state |
| get/set fragmentthreshold | Fragment Threshold |
| get/set frequency | Radio Frequency (MHz) |
| get/set gateway | Gateway IP Address |
| get/set groupkeyupdate | Group Key Update Interval (in Seconds) |
| get/set hostipaddr | Host IP Address |
| get/set ipaddr | IP Address |
| get/set ipmask | IP Subnet Mask |
| get/set keyentrymethod | Encyrption Key Entry Method |
| get/set keysource | Source Of Encryption Keys |
| get/set login | Login User Name |
| get/set nameaddr | IP address of name server |
| get/set power | Transmit Power Setting |
| get/set radiusname | RADIUS server name or IP address |
| get/set radiusport | RADIUS port number |
| get/set rate | Data Rate |
| get/set rtsthreshold | RTS/CTS Threshold |
| get/set rootapmac | Root AP MAC Address |
| get/set shortpreamble | Short Preamble Usage |
| get/set sntpserver | SNTP/NTP Server IP Address |
| get/set ssid | Service Set ID |
| get/set ssidsuppress | SSID Suppress Mode |
| get/set SuperG | SuperG Feature Status |
| get/set systemname | Access Point System Name |
| get/set sta2sta | wireless STAs to wireless STAs connect state |
| get/set eth2sta | ethernet to wireless STAs connect state |
| get/set telnet | Telnet Mode |
| get/set timeout | Telnet Timeout |
| get/set tzone | Time Zone Setting |
| get/set wirelessmode | Wireless LAN Mode |
| get/set wlanstate | wlan state |
| set factorydefault | Default Factory Settings |
| set overridetxpower | Override Transfer Power |
| set password | Modify Password |
| set passphrase | Modify Passphrase |
| set radiussecret | RADIUS shared secret |
